Fujitsu 480 ユーザーズマニュアル
C122-E003-02EN
3-147
MMB
3.5 Network Configuration Menu
Table 3.114 Displayed and setting items in the [Edit Filter] window
Table 3.115 Buttons in the [Edit Filter] window
(1) Menu operation
[Network Configuration]
→
[Access Control]
→
[Add Filter]/[Edit Filter]
(2) GUI operation
1 Make [Protocol], [Access Control], and/or other settings, enter an IP address
and a subnet mask, and then click the [Apply] button.
Additions or changes are then made to management information accordingly.
Additions or changes are then made to management information accordingly.
Item
Description
Protocol
Select the target protocol for IP filtering from the pulldown list:
• HTTP
• HTTPS
• Telnet
• SSH
• SNMP
• HTTPS
• Telnet
• SSH
• SNMP
Access Control
Select the [Enable] or [Disable] radio button to specify whether to
use access control.
Selecting [Disable] permits access from any IP address using the
protocol selected above. Furthermore, the [IP Address] and
[Subnet Mask] fields described below are grayed out, and input to
them is not possible.
Selecting [Enable] enables input in the [IP Address] and [Subnet
Mask] fields and permits access from the specified IP address
using the protocol selected in [Protocol].
use access control.
Selecting [Disable] permits access from any IP address using the
protocol selected above. Furthermore, the [IP Address] and
[Subnet Mask] fields described below are grayed out, and input to
them is not possible.
Selecting [Enable] enables input in the [IP Address] and [Subnet
Mask] fields and permits access from the specified IP address
using the protocol selected in [Protocol].
IP Address
Enter an IP address that has access permission.
Subnet Mask
Enter the subnet mask of IP addresses that have access permission.
Button
Description
Apply
After completing the [Protocol], [Access Control], and/or other
settings, click the [Apply] button. The specified information takes
effect on the system.
settings, click the [Apply] button. The specified information takes
effect on the system.
Cancel
Click the [Cancel] button to revert to the original settings for the
protocol and access control.
protocol and access control.