Fujitsu 480 ユーザーズマニュアル
5-56
C122-E003-02EN
PSA
CHAPTER 5 Web-UI Operations
CHAPTER 5 Web-UI Operations
Table 5.35 Buttons in the [Watchdog] window
(1) Menu operation
[Partition]
→
[Partition #x]
→
[PSA]
→
[Setup]
→
[Watchdog]
(2) GUI operation
• Setting up Watchdog monitoring (when correct values are entered)
1 Select and enter values for the Watchdog monitoring settings, and click the
[Apply] button.
If the entered values are correct, the [Confirm Settings] dialog box opens.
If the entered values are correct, the [Confirm Settings] dialog box opens.
Boot Watchdog
Watchdog
Watchdog
The user can enable or disable Boot Watchdog monitoring:
• Disable: Disable monitoring
• Enable: Enable monitoring
• Enable: Enable monitoring
The default setting is [Disable].
TimeOut
The user can specify a timeout value in seconds, which is used
while Boot Watchdog monitoring is enabled:
Range: 60 to 6000 seconds
Specify a value calculated based on the period of time from the
time the partition is switched on to the time the console/Syslog
receives a startup completion message (the console displays
Starting PSA services: [OK] or Starting PSA services: [OK] or
Syslog includes "FJSVpsa: I00069 PM startup succeeded").
Fujitsu recommends setting a value that is at least twice this
elapsed time in order to prevent mistaken detection. Also,
consider the time taken to save a dump in the event of an OS panic.
You can only specify this item if you select [Enable]. The default
value is 0 seconds. Note that you always need to change the
default value.
while Boot Watchdog monitoring is enabled:
Range: 60 to 6000 seconds
Specify a value calculated based on the period of time from the
time the partition is switched on to the time the console/Syslog
receives a startup completion message (the console displays
Starting PSA services: [OK] or Starting PSA services: [OK] or
Syslog includes "FJSVpsa: I00069 PM startup succeeded").
Fujitsu recommends setting a value that is at least twice this
elapsed time in order to prevent mistaken detection. Also,
consider the time taken to save a dump in the event of an OS panic.
You can only specify this item if you select [Enable]. The default
value is 0 seconds. Note that you always need to change the
default value.
Button
Description
Apply
Click the [Apply] button to set the values entered for Watchdog
monitoring. Clicking this button validates the settings for both
Software Watchdog and Boot Watchdog.
monitoring. Clicking this button validates the settings for both
Software Watchdog and Boot Watchdog.
Cancel
Click the [Cancel] button to clear the entered values and revert to
the original settings.
the original settings.
Item
Description