Fujitsu 480 ユーザーズマニュアル
C122-E003-02EN
7-85
GSWB
7.9 Spanning Tree Menu
Table 7.84 Buttons in the [STP Status] window
(1) Menu operation
[Switch]
→
[GSWB#x]
→
[Spanning Tree]
→
[STP Status]
(2) GUI operation
• Bridge information display
1 Specify [Bridge] in [Target].
2 Click the [Apply] button.
2 Click the [Apply] button.
Port priority
Port priority
Port Identifier
Port ID
Designated root: Root bridge information
priority
priority
Priority
address
MAC address
Designated bridge: Designated bridge information
priority
priority
Priority
address
MAC address
Designated port id
Designated port ID
Designated path cost
Designated path cost (if the interface is not the designated port,
same as the designated path cost in [Config BPDU])
same as the designated path cost in [Config BPDU])
Timers: Flag to indicate whether the timer is active (ACTIVE or INACTIVE is displayed)
forward delay
forward delay
Forward delay timer
hold
Hold timer
Item
Description
Target
Select the target to be displayed.
• Bridge (default): Displays bridge information.
• Interface: Displays interface information.
• Interface: Displays interface information.
Interface
Select an interface.
• IOU (default): Selects an IO_Unit (00 to 71) (default: 00)
• GigabitEthernet: Specifies GigabitEthernet (0/1 to 0/8)
• 10GigabitEthernet: Specifies 10GigabitEthernet (1/1 to 1/2)
• port-channel: Specifies a port channel (1 to 7).
• GigabitEthernet: Specifies GigabitEthernet (0/1 to 0/8)
• 10GigabitEthernet: Specifies 10GigabitEthernet (1/1 to 1/2)
• port-channel: Specifies a port channel (1 to 7).
Button
Description
Refresh
Displays the latest information.
Help
Displays the Help window.
Apply
Sets the specified values.
Item
Description