Fujitsu 480 ユーザーズマニュアル
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
C122-E003-02EN
8-7
GSWB
8.1 Basic CLI Operations
Table 8.4 Error messages of the configuration definition commands
8.1.5.7 Special input format and display format
• Function keys
The following input has special functions in configuration definition editing:
z Pressing the [Ctrl]+[c] keys
If they are pressed during execution of a configuration definition command, the
system returns to the prompt without waiting for the command to be completed.
system returns to the prompt without waiting for the command to be completed.
z Pressing the [Ctrl]+[v] keys
If the [?] key is pressed next, "?" is entered as a character without displaying help
information.
information.
z Pressing the [Ctrl]+[z] keys
This terminates the configure command.
z Pressing the [!] key
If "cr" is entered next, a transition occurs to the configuration mode one layer
above.
above.
• Characters handled as special characters
Since the configuration definition commands consider the following characters to be
special characters, their input and display formats differ from those for ordinary
characters.
special characters, their input and display formats differ from those for ordinary
characters.
{ } = # ! " \ ? <tab> <line feed> <space>
Error message
Cause
Action to be taken
% Incomplete command.
Invalid command entered
Enter a correct command
string.
string.
% Invalid input detected at
'^' marker.
'^' marker.
Invalid character detected at
the '^' marker in the command
input string
the '^' marker in the command
input string
Enter a correct command
string.
string.
% Unrecognized command An invalid command was
entered. "?" is in the middle of
the entered string.
the entered string.
Check the entered command.
% Ambiguous command:
"XXX"
"XXX"
XXX: Entered command
An unrecognizable command
abbreviation was entered (e.g.,
open c ?).
abbreviation was entered (e.g.,
open c ?).
Check the entered command.
No Memory
Insufficient memory
Restart the device.
Fatal error
A fatal error occurred.
Restart the device. Replace the
firmware.
firmware.