Fujitsu 480 ユーザーズマニュアル

C122-E003-02EN

8-163

 

GSWB

8.3 Operation Commands

• Bank cannot be switched.

Cause: Banks cannot be switched.

Action: Check the system status, and reenter the command.  If the error occurs again, 

collect unit information, configuration definition information, and the 
information in different types of logs, and then restart the unit.  Alternatively, 
contact a certified service engineer.

• System error.

Cause: An internal error occurred.

Action: Check the system status, and reenter the command.  If the error occurs again, 

collect unit information, configuration definition information, and the 
information in different types of logs, and restart the unit.  Alternatively, 
contact a certified service engineer.

This command clears the configuration definition file.  Configuration definition 
information is reflected only after the unit is restarted.

The command cannot be executed during execution of any of the following 
commands:  clear config, save, save config, restore config.

z {0 | 1}:  Specifies the configuration definition bank to be cleared.

- 0:  Configuration definition bank 0
- 1:  Configuration definition bank 1

enabled exec

clear config {0 | 1}