IBM 388 ユーザーズマニュアル
Some server models come with a required RAID card to provide advanced SATA/SAS hardware RAID
functions to the server. You can also purchase the RAID card from Lenovo and install it into models that
support the RAID card to get advanced SATA/SAS hardware RAID functions. See “Installing or removing
the RAID card” on page 98.
functions to the server. You can also purchase the RAID card from Lenovo and install it into models that
support the RAID card to get advanced SATA/SAS hardware RAID functions. See “Installing or removing
the RAID card” on page 98.
Note: For server models with more than four hard disk drives or models that use SAS hard disk drives, there
must be a RAID card installed.
must be a RAID card installed.
Option name: ThinkServer 9240-8i RAID 0/1 Adapter (hereinafter referred to as the RAID card)
The following illustration shows the connectors on the RAID card.
Figure 17. ThinkServer 9240-8i RAID 0/1 Adapter
1
Port 0
3
RAID 5 key connector
2
Port 1
4
External connector
1
Port 0
Used to connect a mini-SAS signal cable. See “Connecting cables” on page 38.
2
Port 1
Used to connect a mini-SAS signal cable. See “Connecting cables” on page 38.
3
RAID 5 key connector
Used to connect a ThinkServer 9240-8i RAID 5 Upgrade Key. See “Installing or removing the ThinkServer
9240-8i RAID 5 Upgrade Key” on page 100.
9240-8i RAID 5 Upgrade Key” on page 100.
4
External connector
Used to connect a 2-pin 200 mm (7.87 inches) RAID card to system board hard disk drive LED cable.
See “Connecting cables” on page 38.
See “Connecting cables” on page 38.
Hot-swap hard disk drive backplane
Your server supports the following hot-swap hard disk drive and backplane configurations:
• Five to eight 3.5-inch hot-swap SATA or SAS hard disk drives with two backplanes
• Up to four 3.5-inch hot-swap SATA or SAS hard disk drives with one backplane
34
ThinkServer User Guide