Omron CJ1W-EIP21 ユーザーズマニュアル
326
Using the Automatic Clock Adjustment Function
Section 12-2
12-2-2 Settings Required for Automatic Clock Adjustment Function
The following settings must be set in the Unit Setup when using the automatic
clock adjustment function.
clock adjustment function.
Note
When the Server specification type field in Auto Adjust Time Tab is set to Host
name.
name.
CX-
Programmer
tab
Settings
Setting conditions
Reference
Auto Adjust
Time
Time
Server specification
type
type
Required.
IP Address
One or the other is
required, depending
on the Server specifi-
cation type setting.
required, depending
on the Server specifi-
cation type setting.
Host name
Port No.
Rarely required.
(Change when a set-
ting other than the
default setting of 123
is required.)
(Change when a set-
ting other than the
default setting of 123
is required.)
Get the time informa-
tion from the SNTP
server
tion from the SNTP
server
Required.
Auto Adjust Time
Optional
Retry timer
Optional (Change
when the default set-
ting of 10 seconds is
unacceptable.)
when the default set-
ting of 10 seconds is
unacceptable.)
Adjust Time
Optional
DNS (See
note.)
note.)
IP Address
Required.
Port No.
Rarely required.
(Change when a set-
ting other than the
default setting of 53
is required.)
(Change when a set-
ting other than the
default setting of 53
is required.)
Retry timer
Optional (Change
when the default set-
ting of 10 seconds is
unacceptable.)
when the default set-
ting of 10 seconds is
unacceptable.)