Telect MIX 56 ユーザーズマニュアル
MIX 56 User Manual
4 Software Operation
122188-10 A0
Telect, Inc.
4-7
Save Configuration and Restore Configuration Screens
* “Factory” only appears on the Restore screen and not the Save screen.
System Settings Screen
* Needs to be set on power up.
High-Speed Configuration Screen
Field
Default Setting
#1, Name
“Working Config”
#2, Name
“Test 1”
#3, Name
“Test 2”
#4, Name
“Factory”
*
Field
Default Setting
System Name
“MIX 56”
System Location
Blank
Contact Person
Blank
Date
Varies
*
Time
Varies
*
AIS Terminals LB
“Yes” (as per T1.403)
Low Speed Type
“T1”
LS Remote LB DIR
“DS3”
Active Card
Determined by system at power-up
Redundant M13 Cards
“Yes”
ACO Time
“15 min.”
Inactivity Timeout
“15 min.”
Loopback Permission
“No”
Reset
“Standby Card”
Control
“Local”
Telnet TL1
No
Chassis and Card Versions
Vary depending on release date
Field
Default Setting
Name
“High Speed”
Clock Source
“DS3 Loop Timing”
Mode
“M13”
Optional C-bit LAPD Information Blank