Elation Professional 60 ユーザーズマニュアル

ページ / 34
DESIGN LED 60 Strip™
©Elation Professional, Los Angeles Ca.
10
www.ElationLighting.com
6. MOUNTING AND INSTALLATION
Yoke Assembly – Single Unit Operation (DLED 12 Brick shown for illustration
purposes only). The device can be placed directly on the stage floor or rigged in any
orientation on a truss without altering its operation characteristics. When connecting the
hanging yoke to the fixture, refer to the illustration below.
Cautions:
For added protection mount the fixtures in areas outside walking paths, seating areas, and
away from areas were the fixture might be reached by unauthorized personal.
Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 times the device’s weight.
Fixture installation must always be secured with a secondary safety attachment, such as an
appropriate safety cable.
To  avoid  injury,  never  stand  directly  below  the  device  when  mounting,  removing,  or
servicing the fixture.
Refer to regulations BGV C1 (formerly VBG 70) and DIN VDE0711-217
for proper installation in Europe  To  ensure  proper  installation,  only
qualified staff should attempt installation.
Mounting points