I-Data 812-1x MIO ユーザーズマニュアル
ida 812-1x MIO Operator’s Guide
Front Panel Seup
Front Panel Seup
-21-
5. Front Panel Setup
This chapter describes the setting up of the ida 812-1x MIO
interface via the printer's front panel. Setting up via the front panel
provides an alternative to setting up FSL functions. But please
note that the front panel only offers a few basic setup options. If
you need to make further adjustments, you can use FSL (for non-
IPDS) in addition to front panel setup.
interface via the printer's front panel. Setting up via the front panel
provides an alternative to setting up FSL functions. But please
note that the front panel only offers a few basic setup options. If
you need to make further adjustments, you can use FSL (for non-
IPDS) in addition to front panel setup.
•
HP LaserJet III Si
•
HP LaserJet 4, HP LaserJet 4 Plus,
•
HP LaserJet 4 Si series of printers, HP LaserJet 4V
•
HP LaserJet 5 and 5Si
•
HP Color LaserJet
On the next page, you will find a navigation chart showing the
setup options for the ida 812-1x MIO via the Front Panel.
setup options for the ida 812-1x MIO via the Front Panel.
5.1. Main menu
All front panel communication between the user and the ida 812-
1x MIO NON-IPDS Menu is done as follows:
1x MIO NON-IPDS Menu is done as follows:
•
For HP LaserJet IIISi:
PCL CONFIG MENU
Access to PCL CONFIG MENU:
1.
1.
Go OFF Line
2.
Hold MENU key down for approx. 10 seconds until the
PCL CONFIG MENU appears.
PCL CONFIG MENU appears.
3.
Toggle MENU key till the NON-IPDS MENU appears.
•
For HP LaserJet 4, 4 Plus and HP LaserJet 5: MIO MENU
Access to MIO MENU:
1.
Access to MIO MENU:
1.
Go OFF Line
2.
Toggle MENU key until the MIO MENU appears.
3.
Press ITEM key and the NON-IPDS MENU appears.
•
For HP LaserJet 4/5Si and HP LaserJet 4V: MIO MENU 1
1.
1.
Go OFF Line
2.
Toggle MENU key until the MIO MENU 1 appears.
•
For HP Color LaserJet: MIO CONFIG MENU
Access to MIO CONFIG MENU:
1.
Access to MIO CONFIG MENU:
1.
Go OFF Line
2.
Toggle MENU key until the MIO CONFIG MENU appears.
3.
Press ITEM key and the NON-IPDS MENU appears.