I-Data 812-1x MIO ユーザーズマニュアル
ida 812-1x MIO Operator’s Guide
Function Selection via the Line
Function Selection via the Line
-34-
7.3. Syntax of an FSL Function
The special sequence that the interface will interpret as an FSL
Function is shown in Figure 7-3.
Function is shown in Figure 7-3.
%Y<function number>,<parameters>%
Fig. 7-3: Syntax of an FSL Function. "%" is the defined ESC Character
7.4. Supported FSL Functions
In Appendix A, you will find a full list of the supported FSL Functions
with a description of their syntax and parameters. For a more
detailed description with notes, comments and examples you are
referred to the " ida 812-1x PCL Platform, Programmer's Guide", Doc.
No. D62026.
with a description of their syntax and parameters. For a more
detailed description with notes, comments and examples you are
referred to the " ida 812-1x PCL Platform, Programmer's Guide", Doc.
No. D62026.
The notations below are used in the FSL summary description given
in Appendix A.:
in Appendix A.:
% is the defined ESC Character
*
indicates the factory default
** indicates USA factory default, where if differs from
standard factory default
< > indicates mandatory parameter which must be
defined
[ ] indicates optional parameter which can be
defined, if r equired
7.5. Invalid Escape Sequence
The error message "Invalid Escape Sequence" will be printed on
paper if an invalid escape sequence has been sent to the printer.
paper if an invalid escape sequence has been sent to the printer.
Recovery:
Locate and correct the error in your setup file.