Mitsumi electronic NZ2GF-ETB ユーザーズマニュアル
184
10.3
Parameters
This section describes the parameters of the Ethernet Adapter Module. The setting dialog box can be displayed
by the following operation.
by the following operation.
Setting item tree
NZ2GF-ETB
[Parameter]
The Parameter Setting dialog box contains the following three kinds of settings, and each of them can be
displayed by selecting the tab.
displayed by selecting the tab.
*1
The parameter numbers are used to identify an invalid parameter when a parameter error has occurred.
(1) Buttons
The buttons displayed in the Parameter Setting dialog box are explained below.
Item
Description
Parameter No.
*1
Reference
System
For the Ethernet Adapter Module, specify whether or not to:
• Allow remote reset.
• Hold error logs when the system is powered off or reset.
• Hold error logs when the system is powered off or reset.
1002
H
, 01F0
H
CC-Link IE Field
Network
Network
Configure the settings for connecting the Ethernet Adapter
Module to CC-Link IE Field Network.
Module to CC-Link IE Field Network.
01F0
H
Ethernet
Configure the settings for connecting the Ethernet Adapter
Module to Ethernet.
Module to Ethernet.
9181
H
Button
Description
button
Sets default values for all of the setting items on the current dialog box.
button
Checks if the parameters set on the current dialog box are correct.
button
Ends the setting.
button
Cancels the setting.