Mitsumi electronic NZ2GF-ETB ユーザーズマニュアル
233
APPENDICES
A
Appendix 10 New F
unction
and Impro
ved F
unction
Appendix 10
New Function and Improved Function
The following table lists the new and improved functions.
*1
The English version of the configuration tool starts up under the operating systems of English version.
*2
External devices with a serial number (first five digits) of "14021" or earlier access a station operating as a master station
(master operating station). When the submaster station starts to take in control instead of the master station, the access
destination also changes to the submaster station. (Each time stations in control change, the access destination also
changes.)
Changing the station number to 7E
(master operating station). When the submaster station starts to take in control instead of the master station, the access
destination also changes to the submaster station. (Each time stations in control change, the access destination also
changes.)
Changing the station number to 7E
H
(current control station/master station) allows external devices with a serial number
(first five digits) of "14022" or later to access a station operating as a master station (master operating station).
New function and improved function
Module supporting
the function (first
five digits of the
serial number)
Configuration tool
supporting the
function
Support the English version of the configuration tool
*1
"12102" or later
Version 1.02C or later
L ERR. LED or L ER LED is on while the Ethernet adapter module is performing
loopback.(
"12102" or later
On-demand function (
"13012" or later
The configuration tool is compatible with Windows
®
7
"13092" or later
Version 1.04E or later
Configuration tool functions added (
• Device/buffer memory batch monitor
• Module information display
• Error details display
• Turning off the COM.ERR.LED on the configuration tool
• Module information display
• Error details display
• Turning off the COM.ERR.LED on the configuration tool
Support of the access that specifies the master and submaster stations
(When 7D
(When 7D
H
(specified control station/master station) is selected for the station
number of the request message of SLMP, the master station can be always
accessed.
*3
)
"14022" or later
Support of broadcast communications of the on-demand function
(
"14022" or later
Support of IP communications over CC-Link IE Field Network (IP packet transfer
function) (
"14022" or later
Version 1.05F or later
Configuration tool functions added (
• IP communication test
• Monitoring of the SD LED and RD LED
• Monitoring of the SD LED and RD LED
"14022" or later
Version 1.05F or later