Motorola 326X V.34 ユーザーズマニュアル
Getting Started 3-7
G
e
tting St
arted
Operating Status Displays
The DTE19.2 RELIABL and Phase Jitter subcategories let you view modem
operating status. Example: in the DTE 19.2 RELIABL subcategory, pressing
The DTE19.2 RELIABL and Phase Jitter subcategories let you view modem
operating status. Example: in the DTE 19.2 RELIABL subcategory, pressing
displays:
• Operating status messages
• DTE/DCE rate/status
• Error correction/data compression status
• EIA/TIA signal status
• Disconnect reasons
• The modem’s software revision level
• Circuit Quality Monitoring System (CQMS) parameter status
For details, refer to Appendix A. For details on status displays, refer to Chapter 1, AT
Commands, of the 326X Series Modem Reference Guide.
Commands, of the 326X Series Modem Reference Guide.
Option Sets/Dialing Options
These status subcategories let you choose a preconfigured option set, and make other
selections to determine how the modem will establish telephone connections.
These status subcategories let you choose a preconfigured option set, and make other
selections to determine how the modem will establish telephone connections.
For details on configuring option sets and other call establishment options in this
category, refer to Appendix A.
category, refer to Appendix A.
Where Do I Go from Here?
When you are familiar with the front panel, configuration menu system, and control
keys, refer to the following:
keys, refer to the following:
• Chapter 4 for specific configuration instructions.
• Appendix A to change parameter options, and to enter and dial a telephone
number. The Reference Card shows the complete menu structure.
• Chapter 6 for a discussion of typical problems and ways to correct them.
Using the Modem with a Network Management System
(NMS)
(NMS)
Modem functions can be configured and controlled from an NMS. Refer to:
• The network management system documentation
• Appendix A for brief descriptions of parameter options and features
• The 326X Series Modem Reference Guide for detailed descriptions of
parameter options and features
?