Multi-Tech Systems 7600 ユーザーズマニュアル
ION 7500 / ION 7600 User’s Guide
Enabling/Disabling Meter Web Browser Configuration
WebMeter Internal Web Server Feature Technical Note
Page 277
Enabling/Disabling Meter Web Browser Configuration
You can enable/disable web browser configuration of the meter with Designer
software or the meter’s front panel. Refer to your meter’s Installation and Basic Setup
manual to learn how to enable/disable web browser configuration of the meter
with the front panel. Refer to the following instructions to learn how to enable/
disable web browser configuration with Designer software.
software or the meter’s front panel. Refer to your meter’s Installation and Basic Setup
manual to learn how to enable/disable web browser configuration of the meter
with the front panel. Refer to the following instructions to learn how to enable/
disable web browser configuration with Designer software.
N
OTE
Depending on the meter, web browser configuration of the meter may be enabled by default.
Enabling/disabling web browser configuration of the meter:
The steps are the same for enabling or disabling web browser configuration of the
meter; in step 3 you select either option.
meter; in step 3 you select either option.
1.
Open the meter in Designer and double-click on the Communications Setup
folder. The screen that appears contains shortcuts to several Communications
modules and one Ethernet module.
folder. The screen that appears contains shortcuts to several Communications
modules and one Ethernet module.
2.
Right-click on the icon in the center of the Ethernet module. The ION Module
Setup screen appears.
Setup screen appears.
3.
Double-click the Webserver Config Access setup register and change the value
to “Enabled” or “Disabled.”
to “Enabled” or “Disabled.”
4.
Click Send and save.