Intel Desktop Board D975XBX BOXD975XBXLKR ユーザーズマニュアル

製品コード
BOXD975XBXLKR
ページ / 98
Product Description 
 11 
Table 1. 
Feature Summary (continued) 
Hardware Monitor 
Subsystem 
•  Hardware monitoring and fan control ASIC  
•  Voltage sense to detect out of range power supply voltages 
•  Thermal sense to detect out of range thermal values  
•  Three fan connectors 
•  Three fan sense inputs used to monitor fan activity 
•  Fan speed control 
1.1.2 Manufacturing 
Options 
Table 2 describes the manufacturing options.  Not every manufacturing option is available in all 
marketing channels.  Please contact your Intel representative to determine which manufacturing 
options are available to you. 
Table 2. 
Manufacturing Options 
Auxiliary PCI 
Express Graphics 
Power Connector 
Provides required additional power when using high power (75 W or greater) add-in 
cards in either or both the Secondary PCI Express x16 (electrical x8) and the PCI 
Express x16 (electrical x4) bus add-in card connectors 
ATAPI CD-ROM 
connector 
A 1 x 4-pin ATAPI-style connector for connecting an internal ATAPI CD-ROM drive to 
the audio mixer 
Audio Subsystem 
Intel High Definition Audio subsystem in one of the following configurations: 
•  8-channel (7.1) audio subsystem with five analog audio outputs and two S/PDIF 
digital audio outputs (coaxial and optical) using the Sigmatel* 9221 audio codec 
•  6-channel (5.1) audio subsystem with three analog audio outputs using the 
Sigmatel 9220 audio codec 
Discrete SATA 
RAID controller 
•  Silicon Image Sil 3114 SATA RAID controller 
•  Four SATA connectors (in addition to the four SATA connectors on the 
ICH7-R/ICH7-DH SATA interface) 
IEEE-1394a 
Interface 
IEEE-1394a controller and two IEEE-1394a connectors:  one back panel connector 
and one front-panel connector 
Processor power 
connector 
One of the following connectors for providing +12 V power to the processor voltage 
regulator: 
•  2 x 4-pin (requires a power supply with a dual-rail 2 x 4 power cable).  Boards 
equipped with the 2 x 4-pin processor power connector will also include heatsinks 
in the processor voltage regulator area. 
•  2 x 2-pin 
SCSI Hard Drive 
Activity LED 
Connector 
Allows add-in hard drive controllers (SCSI or other) to use the same LED as the 
onboard IDE controller. 
Trusted Platform 
Module (TPM) 
A component that enhances platform security 
 
 
For information about  
Refer to 
Available configurations for the board