Philips 5900 ユーザーズマニュアル

AXIS 5900 User’s Manual

13

1. Make sure that your printer is switched off and that the Power Adapter 

external is disconnected.

2. Locate the serial number, found on the underside label of the print server, 

and write it down. You will need this number to set the IP address.

3. Connect the printer to the LPT1 or the LPT2 port on the Axis Network Print 

Server using an appropriate printer cable. 

4. Connect the Axis Network Print Server to the wired network using a twisted 

pair category 5 cable, 10baseT and 100baseTX, or better. 

 

5. Switch on the printer and connect the Power Adapter to the Axis Network 

Print Server. The Power indicator will light up. When the Network indicator 
starts to flash, the Axis Network Print Server is successfully connected to the 
network.

6. Wait 1 minute. Press the test button on the Axis Network Print Server to 

print a test page. The test page includes a list of the most important 
parameters, including the network speed, firmware version number and IP 
address of the print server. 

You can install this Axis Network Print Server without using a network cable, 
simply skip step 4 in these instructions.

The Axis Network Print Server uses high-speed Centronics Communication. 
For use with older printers not supporting high speed, this function can be 
disabled by using a standard Web browser. Please refer to “Management and 

Configuration” on page 92, for more information.