Lexmark M412 ユーザーズマニュアル
219
Removing an Option Card
Removing an
Option Card
Before removing an option card, follow the steps under
“Accessing the Printer System Board” on page 201.
“Accessing the Printer System Board” on page 201.
Warning!
The option card is
easily damaged by static elec-
tricity. Touch something metal
before you touch the card.
tricity. Touch something metal
before you touch the card.
To remove an option card:
1
Remove the two screws on either side of the con-
nector slot located on the back of the printer.
nector slot located on the back of the printer.
2
Pull the option card straight out of the system
board connector.
board connector.
3
Place the option card in its original packaging.
If you did not save the packaging, wrap the card in
paper and store it in a box.
paper and store it in a box.
4
Follow the steps under “Installing an
Option Card” on page 216 if you need to install an
option card. Otherwise, go to step 5.
Option Card” on page 216 if you need to install an
option card. Otherwise, go to step 5.
5
Continue with “Closing the Printer System Board”
on page 220.
on page 220.