Lexmark gn2 ユーザーズマニュアル

Carefully select and load paper to avoid paper jams. For more information, see “Avoiding jams” on page 80.

To print all text and graphics using only the black toner cartridge, set the printer to Black Only. For more information,

The Max Speed and Max Yield settings let you choose between a faster print speed or a higher toner yield. Max Yield

Use Eco-Mode to quickly select one or more ways to reduce your printer's environmental impact.

Note: See the table for the multiple settings that change when you select an Eco-Mode setting.

Energy

Reduce energy use, especially when the printer is idle.

Printer engine motors do not start until a job is ready to print. You may notice a short delay before the

first page is printed.

The printer enters Power Saver mode after one minute of inactivity.

When the printer enters Power Saver mode, the printer control panel display light is turned off.

Paper

Enable the automatic duplex feature (on printer models that support duplex).

Turn off print log features.

Energy/Paper Use all the settings associated with Energy mode and Paper mode.

Off

Use factory default settings for all settings associated with Eco-Mode. This setting supports the

performance specifications for your printer.

To select an Eco-Mode setting:

Make sure that the printer is on and Ready appears.

From the printer control panel, press  .

Press the down arrow button until  Settings appears, and then press  .

Press the down arrow button until  General Settings appears, and then press  .

Press the down arrow button until  Eco-Mode appears, and then press  .

Press the left or right arrow button to scroll through the list of possible settings. Press   at the correct setting.
Submitting Selection appears.

Minimizing your printer's environmental impact