Lexmark 248X ユーザーズマニュアル
Section
Section 3: IBM Emulation Mode Printer Commands
27
3
IBM Emulation
Mode Printer
Commands
Mode Printer
Commands
This section provides a detailed description of IBM emulation mode
commands you can use with your printer.
commands you can use with your printer.
Control Codes
Control codes are one-character printer commands that are used to:
•
Manage the printing of a job.
•
Control the movement of the cursor, which changes the current print
position.
position.
• Control
primary
and
secondary
font
selection.
The first 32 characters of the Standard ASCII table are control codes. This
printer uses the following control codes.
printer uses the following control codes.
Code
Name
Name
Symbol
Description
Value
(Dec)
(Dec)
Value
(Hex)
(Hex)
Null
NUL
Null character.
0
00
Sound
Beeper
Beeper
BEL
Sounds the printer beeper for
approximately 1 second.
approximately 1 second.
7
07
Backspace BS
Causes the printer to move the current
print position one character position to the
left.
print position one character position to the
left.
8
08
Horizontal
Tab
Tab
HT
Moves the printhead to the horizontal
tabulation stops.
tabulation stops.
9
09
Line Feed LF
Advances the paper one line on the page. 10
0A
Vertical Tab VT
Moves the paper to the next vertical
tabulation stop set with the printer
command Set Vertical Tabulation Stops
(ESC B).
tabulation stop set with the printer
command Set Vertical Tabulation Stops
(ESC B).
11
0B
Form Feed FF
Advances the paper to the top of the next
page and does a carriage return.
page and does a carriage return.
12
0C