Lexmark 248X ユーザーズマニュアル
53
Section 3: IBM Emulation Mode Printer Commands
Horizontal Movement
Set Horizontal Tabulation Stops
This command sets up to 28 tabulation stops to be used with the printer
command HT, Horizontal Tabulation.
command HT, Horizontal Tabulation.
Usage Notes
n1.....n28
is used to set the tabulator stop positions.
•
ESC D is terminated by a 0 entry.
•
The first tabulation stop is at the leftmost column.
•
Input the tabulation stops (n1.....n28) in ascending numerical order.
•
ESC D 0 clears all existing horizontal tab stops.
•
The printer command ESC R resets to the default horizontal tabulation
stops, which are set at every eight positions beginning at column 9 (9, 17,
25, and so on).
stops, which are set at every eight positions beginning at column 9 (9, 17,
25, and so on).
•
The printer command HT, Horizontal Tabulation, activates the tabulation
stops set by this printer command.
stops set by this printer command.
Set Default Tabulation Stops
This command sets the tabulation stops to the default settings. The default
tabulation stops are set to every 8 columns, beginning at column 9 (9, 17, 25, and
so on).
tabulation stops are set to every 8 columns, beginning at column 9 (9, 17, 25, and
so on).
Usage Notes
•
ESC R clears all vertical tabulation stops.
•
To set user-defined tabulation stops, use printer command ESC D.
Format
ESC D
tab stops
0
Decimal
27
680 n1.....n28 0
Hex
1B
44
n1.....n28 00
Format
ESC R
Decimal
27
82
Hex
1B
52