MPI Technologies 2100 ユーザーズマニュアル
Conditions Requiring Host Notification:
0x010000:
Normal Printer Restart
0x010100:
Physical Media Size or Input Media Source ID Changed
0x011000:
Print Position adjustment (used for resource timeout)
0x01E400:
Cancel Key pressed
7.2 IPDS messages on printout
• IPDS DIMM ERROR
Explanation:
A hardware error is detected on the IPDS DIMM.
A hardware error is detected on the IPDS DIMM.
The IPDS DIMM initialization will now be stopped.
You will not be able to print IPDS from this DIMM.
You will not be able to print IPDS from this DIMM.
Contact your supplier for further information.
• The IPDS personality was unable to allocate sufficient memory.
• The IPDS personality may not work properly until more RAM is
installed.
• The IPDS personality requires at least 8 MB RAM installed in total.
Explanation:
More RAM has to be installed in the printer.
More RAM has to be installed in the printer.
The recommended memory configuration is as follows:
Requirement
Minimum
installed
memory
memory
Recommended
minimum memory
(simple text)
(simple text)
Recommended
minimum memory
(pages with
overlays or
(pages with
overlays or
graphics)
A4/Letter simplex
8 MB
8 MB
12 MB
Generally spoken: The more installed memory, the better performance. Beyond
24 MB of installed memory you should not be able to increase performance
noticeably by adding more memory.
noticeably by adding more memory.
• A checksum error is detected in the IPDS DIMM
Explanation:
The IPDS initialization will now be stopped.
You will not be able to print IPDS from this DIMM.
Contact your supplier for further information.
35