Orbit Manufacturing 2000 ユーザーズマニュアル
Page 5 - 23
Operations
Orbit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
5.3 Lamination section
The lamination section consists mainly of the spool arbor, heating controls, laminating rollers
and the spreader roller.
The laminator serves the purpose of unwind the spool of film via the spool arbor, activating the
thermal adhesive via the chrome roller, laying it on the fed sheets via the laminating rollers and decurling
the sheets for flat separation via the decurling bar.
the sheets for flat separation via the decurling bar.
5.3.1 Film roll positioning
W A R N I N G
CAUTION: Do not wear ties, loose fit clothing or dangling jewelry. These items
can get caught the rollers while working around or loading film.
Use the following instructions to load a roll of film and to properly position it:
1/
Set the lateral film adjust nut ( a ) so that the face is in line with the marker ( b ) on the thread of
the spool arbor ( c ). This provides acenter point in which you can adjust the film shaft left or
right to fine tune the film lay down on the sheets.
right to fine tune the film lay down on the sheets.
a
b
c