Toshiba A60 ユーザーズマニュアル
8-11
O
PTIONAL
D
EVICES
NOTE: The Resume feature can be used with an external monitor. Simply
enable Resume and the computer will maintain the data as it is displayed
on the external monitor.
enable Resume and the computer will maintain the data as it is displayed
on the external monitor.
1.
Connect the monitor to the external monitor port.
2.
Turn the monitor’s power on.
When you turn on the power, the computer automatically recognizes the monitor
and determines whether it is color or monochrome.
and determines whether it is color or monochrome.
You can use the HW Setup to select between
Auto-Selected
and
Simulta-
neous
If you have selected
Simultaneous
under the
Display
options of the HW
Setup, both the external monitor and the internal LCD will be active when you turn
on the computer. If
on the computer. If
Auto-Selected
is selected, only the external monitor will be
active.
To change the display settings, press
Fn + F5
. If you disconnect the monitor
Fn + F5
to switch to the internal
the display setting.
NOTE:
If you set
Simultaneous
for the computer’s display, you must
set the computer’s display resolution to the same as that of the external
monitor or other device, such as a projector.
monitor or other device, such as a projector.
Television
A television can be connected to the video out port on the computer. To connect a
television, follow the steps below.
television, follow the steps below.
1.
Turn the computer off.
2.
Use a video cable (not supplied) to connect the television to the video out
port.
port.
Television