Toshiba 960-498 ユーザーズマニュアル
![Toshiba](https://files.manualsbrain.com/attachments/acaaaa9cc6b763ccfc72ced2ae95d9c94b8b8632/common/fit/150/50/8adbcbcd45c75dc53932fc9caf6f2740daed52d836b76efbd0162ac2599f/brand_logo.png)
4 Replacement Procedures
4.16 VGA Heat sink
4.16 VGA Heat sink
Removing the VGA heat sink
The following describes the procedure for removing the VGA heat sink (See Figure 4-31).
1. After removing the following screws, remove the VGA heat sink.
• M2×4Z BIND
screw x3
VGA heat sink
M2x4Z BIND
Figure 4-31 Removing the VGA heat sink
Installing the VGA heat sink
The following describes the procedure for installing the VGA heat sink (See Figure 4-30 and
4-31).
4-31).
1. If there is already silicon grease on the VGA, clean it with a cloth.
Using a special applicator, apply silicon grease so that the VGA chip on the VGA is
completely covered.
completely covered.
NOTE: Apply the silicon grease enough to cover the chip surface using the special
applicator.
2. Install the VGA heat sink and secure them with the following screws.
• M2×4Z BIND
screw x3
QOSMIO F10 Maintenance Manual (960-498)
4-47