MGE UPS Systems UPS ユーザーズマニュアル

The Main Menu Screen consists of three major components:  the menu buttons, UPS status panel, mimic diagram.

For Mimic Diagram, see section 4.0.

The GCC uses menu button selections on the left side of each screen. For Single-Module selections see Figure 3-

1a. For Multi-Module selections see Figure 3-1b.  

Date  & Time  Shows date and time set in the GCC. Date and time can be changed from

the Control Panel in the Setup screen. See section 2.1.4 Control Panel.

Opens the Setup screen, where the User will be prompted to enter the
password information. See section 2.1.1 Enter Setup.

Opens the Alarm/Event Present screen. Users can also access the
History log. When any alarm is active, the green lamp will change to
blinking red, and the background of the button changes to orange. See
section 5.0 Alarms.

Opens the UPS Main Menu screen. The default name is UPS 1, but can 

be changed in the Setup screen. See section 2.1.1 Enter Setup. 

The second and third line indicates the condition (status) of the system:

◗ 

Normal operation.

◗

Load is protected but there is an alarm. 

◗

GCC has lost communications with system.

◗

System is operating on battery power.

◗

Load is not protected because of fault or User
command.

◗

Maintenance bypass CV is closed and system 

output CB is open.

Opens the Inverter  screen, which displays inverter status and measure-
ments. 

Opens the Rectifier screen, which displays rectifier status and measure-
ments.

Opens the Load  screen, which displays system load status and measure
ments.

Opens the Battery screen, which displays all UPS’s battery information.

Opens the Trend screen, which displays a graphical trend of measurement

Opens the Input screen, which displays measurement of the incoming
Utility of each UPS.