Cisco Systems 3130 ユーザーズマニュアル
2-3
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter 2 Using the Command-Line Interface
Understanding the Help System
For more detailed information on the command modes, see the command reference guide for this release.
Understanding the Help System
You can enter a question mark (?) at the system prompt to display a list of commands available for each
command mode. You can also obtain a list of associated keywords and arguments for any command, as
shown in
command mode. You can also obtain a list of associated keywords and arguments for any command, as
shown in
Interface
configuration
configuration
While in global
configuration mode,
enter the interface
command (with a
specific interface).
configuration mode,
enter the interface
command (with a
specific interface).
Switch(config-if)#
To exit to global
configuration mode,
enter exit.
configuration mode,
enter exit.
To return to
privileged EXEC
mode, press Ctrl-Z
or enter end.
privileged EXEC
mode, press Ctrl-Z
or enter end.
Use this mode to configure
parameters for the Ethernet
ports.
parameters for the Ethernet
ports.
For information about defining
interfaces, see the
interfaces, see the
To configure multiple
interfaces with the same
parameters, see the
interfaces with the same
parameters, see the
.
Line configuration
While in global
configuration mode,
specify a line with
the line vty or line
console command.
configuration mode,
specify a line with
the line vty or line
console command.
Switch(config-line)#
To exit to global
configuration mode,
enter exit.
configuration mode,
enter exit.
To return to
privileged EXEC
mode, press Ctrl-Z
or enter end.
privileged EXEC
mode, press Ctrl-Z
or enter end.
Use this mode to configure
parameters for the terminal
line.
parameters for the terminal
line.
Table 2-1
Command Mode Summary (continued)
Mode
Access Method
Prompt
Exit Method
About This Mode
Table 2-2
Help Summary
Command
Purpose
help
Obtain a brief description of the help system in any command mode.
abbreviated-command-entry?
Obtain a list of commands that begin with a particular character string.
For example:
Switch# di?
dir disable disconnect
abbreviated-command-entry<Tab>
Complete a partial command name.
For example:
Switch# sh conf<tab>
Switch# show configuration