Cisco Systems 3040 ユーザーズマニュアル

This guide is for the networking professional using the Cisco IOS command-line interface (CLI) to
manage the Cisco Catalyst Blade Switch 3040 for Fujitsu Siemens Computers (FSC), referred to as the
switch. Before using this guide, you should have experience working with the Cisco IOS commands and
the switch software features. Before using this guide, you should have experience working with the
concepts and terminology of Ethernet and local area networking.

The Cisco Catalyst Blade Switch 3040 for FSC is referred to as the blade switch in the documentation
for the Fujitsu Siemens Computers PRIMERGY BX600 S2 blade server (also referred to as the BX600
system in the blade switch hardware documentation).

This guide provides the information that you need about the Layer 2 commands that have been created
or changed for use with the switch. For information about the standard Cisco IOS Release 12.2 commands,
see the Cisco IOS documentation set available from the Cisco.com home page by selecting Technical
Support & Documentation > Cisco IOS Software.

This guide does not provide procedures for configuring your switch. For detailed configuration
procedures, see the software configuration guide for this release.

This guide does not describe system messages you might encounter. For more information, see the
system message guide for this release.

For documentation updates, see the release notes for this release.

This publication uses these conventions to convey instructions and information:

Command descriptions use these conventions:

Commands and keywords are in boldface text.

Arguments for which you supply values are in italic.

Square brackets ([ ]) means optional elements.