Cisco Systems M SFS7000E ユーザーズマニュアル
Americas Headquarters:
© 2007 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco M SFS7000E Installation Note:
InfiniBand Blade Switch for the Dell Modular
Server Chassis
InfiniBand Blade Switch for the Dell Modular
Server Chassis
This document provides instructions on how to install the Cisco M SFS7000E InfiniBand Switch in the
Dell Modular Server Chassis. The Dell Modular Server Chassis is a system that supports up to sixteen
server modules and up to four InfiniBand switches. You may install the InfiniBand switch in one of four
chassis I/O module bays on the rear panel of the server chassis.
Dell Modular Server Chassis. The Dell Modular Server Chassis is a system that supports up to sixteen
server modules and up to four InfiniBand switches. You may install the InfiniBand switch in one of four
chassis I/O module bays on the rear panel of the server chassis.
Note
There are six chassis I/O module bays on the rear panel of the server chassis. The InfiniBand switches
are supported in the middle four bays that are connected to Fabrics B and C.
are supported in the middle four bays that are connected to Fabrics B and C.
For details about the number, types, and location of the module bays and for additional information about
the entire modular server system, see the documentation for the Dell PowerEdge Servers at
the entire modular server system, see the documentation for the Dell PowerEdge Servers at
www.support.dell.com
.
Contents
This publication includes the following sections:
•
•
•
•
•
•
•
•
•