Multi-Tech Systems FR111 ユーザーズマニュアル
82
6.4
Reset Options
The Reset Options menu allows you to reset the unit, the data channel,
or return to the previous menu or to the Main Menu.
or return to the previous menu or to the Main Menu.
Reset Options
1 - Reset Unit
2 - Reset Data Channel
M - Main Menu
P - Previous Menu
2 - Reset Data Channel
M - Main Menu
P - Previous Menu
Selection : _
To reset the unit, enter 1 and press ENTER. To reset the data channel,
enter 2 and press ENTER. To return to the previous menu, enter P and
press ENTER. To return to the Main Menu, enter M and press ENTER.
enter 2 and press ENTER. To return to the previous menu, enter P and
press ENTER. To return to the Main Menu, enter M and press ENTER.
6.5
Diagnostic Tests
The Diagnostic menu allows you to run two loopback tests, a watch dog
test, display the product and firmware identification or return to the
previous menu or the Main Menu.
test, display the product and firmware identification or return to the
previous menu or the Main Menu.
Diagnostics
1 - Loop Tests
2 - Memory Tests
3 - Watch Dog Test
4 - Product and Firmware ID
5 - Flash Firmware Upgrade
M - Main Menu
P - Previous Menu
Selection : _
6.5.1 Loop Tests
The Loop Tests menu allows for selection of two loopback tests, or
return to the previous menu or to the Main Menu. The Data Port Loop-
back Test tests the interface between the data device and the Multi-
FRAD. The Trunk Loopback Test tests can be used both locally and
remotely. When it is used locally, the internal DSU should be set to
return to the previous menu or to the Main Menu. The Data Port Loop-
back Test tests the interface between the data device and the Multi-
FRAD. The Trunk Loopback Test tests can be used both locally and
remotely. When it is used locally, the internal DSU should be set to