Motorola P880 ユーザーズマニュアル

2 - 16

Cajun P880 Routing Switch Installation Guide

The All Ports Configuration dialog box allows you to apply the same 
parameter settings to all ports in a module using a single command. 

To set all ports in a module:

1. In the System Configuration section of the Web Agent 

window, select 

Modules & Ports. The Module Information 

dialog box opens.

2. In the Ports column, click the number for the module you want 

to configure (for example, 

10 for 100BASE-FX). The Port 

Configuration dialog box opens.

3. Click All Module Switch Ports Configuration. The All Ports 

Configuration dialog box opens.

4. Set port parameters as described beginning in “Configuring 

Physical Port Parameters on Gigabit Ports”, earlier in this chapter.

5. Click APPLY to save your changes, or CANCEL to restore 

previous settings.

Determines the limit of packets allowed in a 
single burst. Accepted values are 1 to 2048. For 
Fast Ethernet ports, set this value lower than 
1024 (output buffer capacity). Lower this value 
if the port has overflow problems.

Determines if the port detects 3Com’s 
proprietary PACE format as packets pass 
through the port. PACE allows a packet’s 
priority (higher priority packets move through 
the switch before lower priority packets) to be 
set at the adapter.