Motorola P120 ユーザーズマニュアル
Chapter 7
Cajun Campus CLI (Command Line Interface)
Cajun P120 User’s Guide
79
Show Port Flowcontrol Command
Use the
show port flowcontrol
command to display per-port status
information related to flow control.
The syntax for this command is:
show port flowcontrol [slot_num[/port_num]
Example:
This example shows how to display the flow-control port status and statistics:
Console> show port flowcontrol
Output Fields
slot_num
Module number (always 1)
port_num
(Optional) Number of the port on the module. If you do not specify
a number, filters configured on all the Cajun P120 ports are shown.
a number, filters configured on all the Cajun P120 ports are shown.
Port
Send-Flow Control
Receive-Flow Control
-----
Admin
----------
Oper
------
Admin
--------
Oper
--------
1/1
on
on
on
on
1/2
off
off
off
off
Field
Description
Port
Module and port number.
Send-Flow
Control- Admin
and
Send-Flow
Control- Oper
Flow-control administration. Possible settings:
• ON indicates the local port sends flow control to the far
• ON indicates the local port sends flow control to the far
end;
• OFF indicates the local port does not send flow control
to the far end;
Receive-Flow
Control- Admin
and
Receive-Flow
Control- Oper
Flow-control administration. Possible settings:
• ON indicates the local port requires the far end to send
• ON indicates the local port requires the far end to send
flow control;
• OFF indicates the local port does not allow the far end
to send flow control;