Fujitsu RX600 S6 ユーザーズマニュアル

34

Operating Manual

 RX600 

S6

Modules with electrostatic-sensitive devices are identified by the following 
sticker:

Figure 1: ESD label

When you handle components fitted with ESDs, you must always observe the 
following points:

●

Switch off the system and remove the power plugs from the power outlets 
before installing or removing components with ESDs.

●

You must always discharge static build-up (e.g. by touching a grounded 
object) before working with such components.

●

Any devices or tools that are used must be free of electrostatic charge.

●

Wear a suitable grounding cable that connects you to the external chassis 
of the system unit.

●

Always hold components with ESDs at the edges or at the points marked 
green (touch points).

●

Do not touch any connectors or conduction paths on an ESD.

●

Place all the components on a pad which is free of electrostatic charge.

I

For a detailed description of how to handle ESD components, see the 
relevant European or international standards (EN 61340-5-1, 
ANSI/ESD S20.20).