Fujitsu Cloud Edition V3.1.0 ユーザーズマニュアル

1.

In the ROR console server resource tree or network resource device tree, right-click the target LAN switch name and select [Modify]-
[Registration Settings] from the popup menu.

The [Modify LAN Switch] dialog is displayed.

2.

Make changes to the values as needed.

3.

Click <OK>.

The settings for the LAN switch are changed with the entered information.

 

 Note

-

It is possible to set the IP address of the target switch to another unregistered LAN switch. However, this will result in the Resource
Orchestrator configuration being inconsistent with the actual network configuration.
If the IP address of the target switch is set to the same address as that of another unregistered LAN switch unintentionally, change
back the target LAN switch IP address to its original value according to the instructions given in this section.
If there are more than one LAN switch with inconsistent IP address configurations, delete all registered LAN switches according to
"

-

SSH connection (SSH version 2) can be selected for the following LAN switch blades.

-

LAN switch blade PY CB Eth Switch/IBP 10Gb 18/8 (1.00 or later version)

-

LAN switch blade PY CB Eth Switch/IBP 1Gb 36/8+2 (4.16 or later version)

-

LAN switch blade PY CB Eth Switch/IBP 1Gb 36/12 (3.12 or later version)

-

LAN switch blade PY CB Eth Switch/IBP 1Gb 18/6 (3.12 or later version)

VLAN types and IDs set on the external connection ports of a managed LAN switch blade can be changed.

 

 Note

-

VLANs cannot be changed on PRIMERGY BX900/BX400 LAN switch blades operating in IBP mode.

-

If the port VLAN ID is unspecified or 1, a tagged VLAN ID cannot be set to 1.

-

When using End-Host Mode for the following LAN switch blades, cannot modify a port vlan id, and remove a tag vlan for the external
ports which meet the follwoing conditions.

When doing the operation, inactivate a target external port, or change vlan id for internal ports which have the same vlan id as a target
external port.

LAN switch blade

-

PY CB Eth Switch/IBP 1Gb 36/8+2

-

PY CB Eth Switch/IBP 1Gb 36/12

-

PY CB Eth Switch/IBP 1Gb 18/6

Conditions

-

The port is selected as Selected Port

-

The port is activated

-

More than one internal port have the same vlan.

- 77 -