Fujitsu N800 ユーザーズマニュアル
78
U41243-J-Z156-1-76
Floppy disk cannot be read/written
Troubleshooting and tips
7.7
Floppy disk cannot be read/written
Ê
Check whether the write protection of the floppy disk is activated.
Ê
Check the entry for the floppy disk drive in BIOS Setup.
Ê
Check BIOS Setup to see whether the floppy disk drive controller and write
permission are enabled.
permission are enabled.
7.8
Time and date are not correct
Ê
Set the time and/or date in the operating system or in BIOS Setup.
I
If the time and date are repeatedly wrong when you switch on your
server, you must change the lithium battery. Please contact our service
department.
server, you must change the lithium battery. Please contact our service
department.
7.9
System will not boot
The system will not boot after installing a new hard disk drive.
SCSI configuration incorrect (Ultra Wide SCSI controller)
Ê
In the SCSI configuration menu, check the settings for the hard disk drives
(SCSI Device Configuration) and the settings under Advanced Configuration
Options.
(SCSI Device Configuration) and the settings under Advanced Configuration
Options.