Fujitsu MX130 S2 ユーザーズマニュアル

ページ / 256
200
Upgrade and Maintenance Manual
 MX130 
S2
System board and components
12.1 Replacing the CMOS battery
CMOS memory (volatile BIOS memory) and the real-time clock are powered by 
a lithium coin cell (CMOS battery). This cell lasts two to ten years, depending 
on ambient temperature and use.
If the CMOS battery is depleted or falls below minimum voltage levels, it need 
to be replaced immediately.
Safety notes
V
CAUTION!
The CMOS battery must be replaced with an identical battery or with 
a battery type recommended by the manufacturer.
Keep lithium batteries away from children.
Do not throw batteries into the trash can. Lithium batteries must be 
disposed of in accordance with local regulations concerning special 
waste.
For further safety information, please refer to section "Environmental 
protection" in the PRIMERGY MX130 S2 Operating Manual.
Ensure to insert the CMOS battery the with the positive pole 
facing up!
12.1.1 Required tools
Preliminary and concluding steps: tool-less
Replacing the battery: tool-less; recommended: tooth pick
Upgrade and Repair Units (URU)
Average task duration: 5 minutes