Multitech FF240 ユーザーズマニュアル
Chapter 3: Web Management Interface
Multi-Tech Systems, Inc.
FF240-IP Admin User Guide
38
Save/Restore
After you have entered the specific settings to have your FF240-IP working in your environment, coming
here to save those settings is a good idea. Were something to happen and you lost what had been
entered, you can easily reset the unit to working condition if you have a saved configuration file.
here to save those settings is a good idea. Were something to happen and you lost what had been
entered, you can easily reset the unit to working condition if you have a saved configuration file.
Save/Restore Configuration
Save Config
The Save Config link will save settings entered during this session to a configuration file that can
be retrieved later using the restore configuration option.
The Save Config link will save settings entered during this session to a configuration file that can
be retrieved later using the restore configuration option.
Click on the Save File button, and then click OK. When saving a configuration file, try and use a
place that will help you remember where it is stored.
place that will help you remember where it is stored.
Restore Factory Defaults
Clicking this link will reset all data in the FF240-IP to the default values that were set at the
factory. Use this with caution. This will reboot the FF240-IP.
Restore Config
Click on the Browse button after the box to navigate to a previously saved configuration file.
Once selected, click the Restore button to have those saved values used once again.
Clicking this link will reset all data in the FF240-IP to the default values that were set at the
factory. Use this with caution. This will reboot the FF240-IP.
Restore Config
Click on the Browse button after the box to navigate to a previously saved configuration file.
Once selected, click the Restore button to have those saved values used once again.
Restore button
Once a saved configuration file has been entered in the restore config box, clicking the restore
button will use those values that were retrieved above, to set up the FF240-IP with the values
saved in that configuration file. This will reboot the FF240-IP.
Once a saved configuration file has been entered in the restore config box, clicking the restore
button will use those values that were retrieved above, to set up the FF240-IP with the values
saved in that configuration file. This will reboot the FF240-IP.