Motion Computing AB52242 ユーザーズマニュアル

51

Chapter 2  Using Your Motion Tablet Client

1. To install an SD Card, insert it in the slot, label side up.
2. To remove the SD Card, grip the edge of the card and carefully pull it 

from the slot. Notice that the edge of the Tablet Client is curved 

slightly in the area of the SD Card. This makes it easier to grip the 

edge of the card for insertion and removal.

There are two high speed USB ports on the left edge of the Tablet Client. 
These can be used to attach any USB device to the Tablet Client. Typically a 
USB device draws power from the Tablet Client and it is advisable to use AC 
power when one or more USB devices are attached. Running USB devices 
while on the battery power will affect your power consumption.

The speaker port is on the left edge of the Tablet Client. It is marked with a 
small headphones symbol and is designed as an audio output channel only. 
You can attach external speakers or headphones to this port. When 
headphones or external speakers are attached, the internal speakers are 
disabled.

The microphone port is on the left edge of the Tablet Client. It is marked with 
a small microphone symbol and is designed as an audio input/line in 
channel only. You can attach an external microphone directly to this port to 
enhance your audio recording capabilities. When an external microphone is 
attached, the built-in microphones are disabled.

The VGA Connector is on the left edge of the Tablet Client. It is intended for 
use with standard analog video displays. An attachment cable is not 
provided for this purpose; if you use the Tablet Client with a standard VGA-
type display, you will need to purchase a corresponding cable. When an 
external monitor is attached, the Motion Dashboard display settings can be 
used to set the external display as a mirrored or extended display.