Multi-Tech Systems FF130 ユーザーズマニュアル
Chapter 3: FaxFinder Web Management Interface
FaxFinder Administrator User Guide
41
Field
Description
Version
Displays the firmware version currently installed on the FaxFinder. Verify that this
version is older (generally a smaller number) than the firmware currently
available on the Multi-Tech Installation Resources site.
version is older (generally a smaller number) than the firmware currently
available on the Multi-Tech Installation Resources site.
Caution:
Do not install an older firmware version unless Multi-Tech Technical
Support tells you to do so.
Upload Firmware The firmware file ends in .BIN. This is the main update file.
MD5 Checksum
MD5 Checksum
The MD5 Checksum file ends in .BIN.MD5. It is a small file that provides a safety
net for possible firmware file corruption that can occur during a download or be
caused by bad sectors on a hard drive.
net for possible firmware file corruption that can occur during a download or be
caused by bad sectors on a hard drive.
To update the firmware:
Important:
Do not power off FaxFinder during the update process.
1.
Click Browse and select the ffupdate_FFxxx_#.#.bin from the files you extracted. FFxxx represents
the FaxFinder model number and #.# represents the update version.
the FaxFinder model number and #.# represents the update version.
2.
Click Browse and select the ffupdate_FFxxx_#.#.bin.md5 from the files you extracted. FFxxx
represents the FaxFinder model number and #.# represents the update version.
represents the FaxFinder model number and #.# represents the update version.
3.
Click Update. The update process takes several minutes.
4.
Log back into FaxFinder when the update graphic stops spinning and the Login page appears.
Note:
During the upgrade, the HTTPS port (TCP 443 by default) and TCP port 80 need to be open to
the FaxFinder if there is a firewall or other security software blocking these ports.
the FaxFinder if there is a firewall or other security software blocking these ports.
Also, the upgrade occasionally takes longer than expected. This cause the browser to show a
timeout when the process tries to display the login screen. If this occurs, wait approximately
one minute and then refresh your browser.
timeout when the process tries to display the login screen. If this occurs, wait approximately
one minute and then refresh your browser.
Updating Modem Firmware
This section is for updating the FaxFinder’s internal modems. Your model will determine how many
internal modems are available. For updating the FaxFinder unit itself, please see the section above.
internal modems are available. For updating the FaxFinder unit itself, please see the section above.
Note:
Multi-Tech recommends that you save the current configuration before updating firmware.
The download for modem firmware you extracted contains a .hex file.
Field
Description
Update
Check the box associated with an internal modem to update it with new firmware.
You can update multiple modems at one time. Verify that modems are not sending
or receiving a fax before starting the update.
You can update multiple modems at one time. Verify that modems are not sending
or receiving a fax before starting the update.
Modem
The internal modem. The number is based on the FaxFinder model (1 for the FF130,
1-2 for the FF230, 1-4 for the FF430 and 1-8 for the FF830).
1-2 for the FF230, 1-4 for the FF430 and 1-8 for the FF830).
Version
Displays the firmware version currently installed on the modem. Verify that this
version is older (generally a smaller number) than the firmware currently available
on the Multi-Tech Installation Resources site.
version is older (generally a smaller number) than the firmware currently available
on the Multi-Tech Installation Resources site.
Caution:
Do not install an older firmware version unless Multi-Tech Technical
Support tells you to do so.