Motorola DS6707 ユーザーズマニュアル

5 - 4

Symbol DS6707 Digital Imager Scanner Product Reference Guide

The parameters in this chapter control image capture characteristics. Image capture occurs in all modes of 
operation, including decode, video, and snapshot.

The digital imager scanner has three modes of operation: 

Decode Mode

Snapshot Mode

Video Mode.

By default, when you pull the trigger the digital imager scanner attempts to locate and decode enabled bar codes 
within its field of view. The digital imager scanner remains in this mode until it decodes a bar code or you release 
the trigger. 

Use Snapshot Mode to capture a high-quality image and transmit it to the host. To temporarily enter this mode scan 
the Snapshot Mode bar code. While in this mode the digital imager scanner blinks the green LED at 1-second 
intervals to indicate it is not in standard operating (decode) mode. 

In Snapshot Mode, the digital imager scanner turns on its laser aiming pattern to highlight the area to capture in the 
image. The next trigger pull instructs the digital imager scanner to capture a high quality image and transmit it to 
the host. A short time may pass (less than 2 seconds) between when the trigger is pulled and the image is captured 
as the digital imager scanner adjusts to the lighting conditions. Hold the digital imager scanner steady until the 
image is captured, denoted by a single beep.

If you do not press the trigger within the Snapshot Mode Timeout period, the digital imager scanner returns to 
Decode Mode. Use 

 to adjust this timeout period. The default timeout period 

is 30 seconds.

To disable the laser aiming pattern during Snapshot Mode, see 

In this mode the digital imager scanner behaves as a video camera as long as you press the trigger. Release the 
trigger to return the digital imager scanner to Decode Mode. Scan this bar code to temporarily enter Video Capture 
Mode.