Motorola 3.1 ユーザーズマニュアル

When deploying the VMM6300 consider the following: 
•  The antenna should be a minimum of 30 inches from any nearby metal poles to avoid 

distortion of the RF pattern.   

•  The antenna must have a separation distance of at least 2 meters from the body of all 

persons and must not be co-located or operating in conjunction with any other antenna or 
transmitter.   

•  Users and installers must be provided with antenna installation and transmitter operating 

conditions to satisfy RF exposure compliance.  

•  Typically, Vehicle Mounted Modems are distributed within a network and are used as 

subscriber devices. A rule of thumb is to deploy 2-3 hop networks to optimize range, latency, 
and throughput to subscriber devices.  

•  The VMM6300 installation location must provide applicable DC power for the device. 
• It is 

required

 that the VMM chassis be grounded to minimize the possibility of ESD 

(electrostatic discharge) induced damage.  

 

Locate the antenna to minimize multipath:  

- Minimize interference from nearby transmitters 

- Maximize chance of a direct line of sight connection to other devices. 

- Mount the supplied antenna vertically 

 

Verify the operation of the VMM6300 using the following procedure:  

 
1.  Apply power to the VMM6300 – power reset button will be illuminated to red. 

5