Motorola 3.1 ユーザーズマニュアル

In order to set the user-supplied IP address for the VMM, the User-Supplied radio button must 
be selected. At that point, the user may enter an IP address and subnet mask consistent with 
the existing network. The user should also enter the IP address of the default gateway and DNS 
server, as well as enter the domain name. 

Note that this configures the user-supplied address for the VMM device. To configure addresses 
for Ethernet clients, refer to the description in the External Device Provisioning section of this 
guide. 

A similar screen will be displayed for the access account (the web page will indicate Normal 
User  Login).  Normal users can change only those settings for which they have system 
privileges. 

When the desired configuration has been completed, click on the Apply button on the Device 
Addressing  panel on the Device Administration Configuration Page.  You will be prompted to 
verify that the changes to the configuration are correct before the changes are actually applied. 

 

 

 

When you click on the OK button, the configuration will be saved in flash.  The System Settings 
Have Been Saved message, on the System Update Save Completed page, will then confirm 
that the changes have been saved. 

17