Multiquip HS62 ユーザーズマニュアル

HS62 CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #5 (09/12/05) — PAGE 21

HS62 CUT-OFF SAW — WATER KIT INSTALLATION PROCEDURE

Figure 21. Water Kit Parts

Figure 22. Water Kit Assembly Points

Figure 23. Wet Air Filter Canister

Water Kit Installation Procedure

Connect the

Quick Disconnect Fitting

to the

single end of the

Water Hose

Snap fit the

Water Hose Outlets

to the

Holes in the

Blade Guard . Orient the Water Hose

through the

Front Handle.

Loop the

Hose Clamp

around the

Water Hose

and fasten the clamp to the

Roller Bar Support Arm

using the Socket Head Cap Screw w/ Washer

, and

Hex Key Tool

Use the

Plastic Ties

as preferred to further secure

the hose fittings and water hose to the saw.

When using the Water Kit option for your saw, the Dry

Air

Filter Canister MUST be replaced with the Wet Air Filter

Canister

(See page 54, Item 10).

Contents of Water Kit

The contents of the Water Kit cannot be purchased seperately.

See page 63-63 for Water Kit part number.

Hose Clamp

Socket Head Cap Screw w/ Washer

Quick Disconnect Fitting

Water Hose

Hex Key Tool

(Included with Tool Kit, page 64, Item 1)

Plastic Ties

Wet

Air Filter Canister

(Sold Seperately)