Jonsered CC 2145 ユーザーズマニュアル

English

 – 31

Running problems can occur when using the machine in the 
cold and snowy conditions caused by:

•

Too low engine temperature.

•

Icing of the air filter and carburetor.

Special measures are therefore often required:

•

Partly mask the air inlet on the starter to increase the 
working temperature of the engine.

•

Preheat the intake air to the carburetor by using the heat 
from the cylinder.

°C (41°F) or colder:

The air filter holder is prepared so it can be changed for use 
in the cold. Remove the air filter cover and air filter. Turn the 
winter cover anticlockwise using a screwdriver so that the 
preheated air from the engine can pass inside the carburettor 
compartment and prevent, for example, the air filter from icing 
up (see figure).

For temperatures below 5

°C (41°F) and/or in snow conditions 

there is also:

•

a special cover for the starter housing

These reduce the cooling air and prevent large amounts of 
snow from being sucked into the engine.

IMPORTANT! The machine MUST be returned to its 
standard design at temperatures warmer than 5

°C (41°F). 

Otherwise there is a risk of overheating resulting in serious 
engine damage.

IMPORTANT! Use only JONSERED replacement parts. 
Use of other brands of replacement parts can cause 
damage to your unit or injury to the operator or others. Your 
warranty does not cover damage or liability caused by the 
use of accessories and/or attachments not specifically 
recommended by JONSERED.