Frigidaire 318203658 ユーザーガイド

9

Use a soap-filled scouring pad or a mild abrasive cleanser to 

clean the surface Burner Caps and Burner Heads. The ports 

(or slots) around the Burner Heads must be routinely checked. 

If residue still remains in these ports (or slots), use a small-

gauge wire or needle to clean the slots or holes. For proper 

flow of gas and ignition of the burner—do not alloW 

oPening. alWaYs keep the surface Burner Caps in place 

whenever the gas Burners are in use or not.
to Clean the Burner Grates- Be sure burners and 

grates are cool before you place your hand, a pot 

holder, cleaning cloths or other material on them. The 

cast iron burner grates can be washed in hot soapy 

water. Rinse thoroughly and dry the grates with a cloth - 

don't put them on the cooktop while still wet. Be sure the 

grates are positioned securely over the burners.

To remove burned on food, place the grates in a covered 

container or plastic bag. Add 1/4 cup ammonia and soak for 

30 minutes. Wash, rinse well and dry. An abrasive cleaner 

can be used for stubborn stains.

The cooktop is designed to make cleaning easier. Because 

the gas Burners are sealed, cleanups are easy when 

spillovers are cleaned up immediately. 
The cooktop, Burner Heads and Caps should be routinely 

cleaned. Keeping the Burner Head Ports clean will 

prevent improper ignition and an uneven flame. Refer to 

the following instructions:

tHe COOKtOP IS NOt reMOVABLe. Do not 

attempt to remove or lift the cooktop.

Pay attention to not damage electrodes. Damaged 

electrodes may cause a delayed ignition or prevent the 

burner from igniting.

Any additions, changes or conversions required in order 

for this appliance to perform satisfactorily must be 

made by an authorized Service Center.

Prior to using your cooktop for the first time, apply the 

recommended CERAMA BRYTE® Cleaning Creme to the 

ceramic surface. Clean and buff with a non abrasive cloth 

or pad. This will make cleaning easier when soiled from 

cooking. The special cooktop cleaning cream leaves a 

protective finish on the glass to help prevent scratches 

and abrasions.

Sliding aluminum or copper clad bottom pans on the 

cooktop can cause metal markings on the cooktop 

surface. These marks should be removed immediately 

after the cooktop has cooled using the cooktop cleaning 

cream. Metal marks can become permanent if not 

removed prior to future use.
Cookware (cast iron, metal, ceramic or glass) with rough 

bottoms can mark or scratch the cooktop surface. do 

not slide anything metal or glass across the cooktop. 

do not use your cooktop as a cutting board or work 

surface in the kitchen.  do not cook foods directly on the 

cooktop surface without a pan. do not drop heavy or 

hard objects on the glass cooktop, or they may crack it.