Philips VL1400 プリント

ページ / 2
Links Pay-TV,VCR, DVD and Satellite receiver to your second TV!
The Philips SBC VL1400 Wireless TV Link lets you watch, control and enjoy A/V
content on both your main TV and a second TV located anywhere else in your
house. There’s no need to buy or rent duplicate A/V equipment, and two people
can watch and enjoy two different things.
No more cable laying or hole drilling!
Because the SBC VL1400 uses a wireless RF link, there's no drilling holes or
running cables upstairs to be able to watch your video devices on other locations
in your home.
4 video source inputs
The Wireless TV Link has four separate inputs, each with its own SCART
connector, to allow you to connect up to four A/V source devices at the same
time. It works as a switchbox for both your main and second TV.
Six-in-one universal remote control
There’s no need to walk to the receiver either, because a six-in-one universal
remote control is supplied to make it possible to operate the transmitter and
receiver, and up to five video sources from the second TV. And it works with every
brand of A/V equipment too. When you switch on the receiver and select an input
source, the transmitter is automatically switched on
Wireless RF system
By transmitting crystal clear pictures and stereo sound through walls and ceilings
to your second TV, it extends your possibilities for viewing movies, sports events,
live performances and an incredibly wide range of TV channels anywhere in your
home. The range is up to 30 meters indoors. A multiple-position slide-switch
allows different transmission frequencies to be selected to avoid interference from
other RF devices.
Plug & Play installation for all A/V brands
Install any brand of TV, VCR, DVD, satellite receiver, Pay-TV decoder or any other
device with a SCART connector in minutes.
No need to swap SCART cables
The SCART switchbox functionality means that all your video devices are
available for both your main and secondary TV at all times. This makes it easy to
switch between your DVD player, satellite receiver, VCR and set-top box without
reconfiguring your entire home cinema set-up.
Helpdesk available
Should you have any questions, comments or recommendations 
about the Wireless TV Link, please call our helpdesk.
Philips Accessories & Recordable Media
Data subject to change without notice
©2002 Royal Philips Electronics
All rights reserved
http://www.philips.com
Helpdesk available
SBC
VL1400
Wireless TV Link  
General product information
Power supply 
12V DC via 220-240 VAC/ 50 Hz adapter
Power consumption
7 Watts
Operating / storage temperature 
5 to 45ºC / -25 to 55ºC
Plug and Play system 
via SCART connectors
Number of A/V source inputs
4
Audio L/R out transmitter
yes (RCA)
SCART switchbox (RGB enabled)
yes (can be overruled manually)
Universal Remote Control 
included: 6 in 1 (LINK,TV,VCR, DVD,
SAT, CBL)
Wireless Audio/Video  performance 
Supported video standards 
CVBS: PAL/NTSC/SECAM
Video output
1Vpp into 75ohm
Signal noise
47dB ± 6dB
Audio format 
Stereo (L + R)
Freq. Range
70 Hz – 20kHz (± 3dB)
Signal Noise
58dB ± 7dB
Crosstalk (1kHz)
45dB, min.
Distortion (1kHz)
2%, max.
RF A/V system information
Typical range 
up to 100 m in open air, up to 30 m indoors
Carrier frequency 
2.4 GHz / FM mod.
Transmission power 
<10 mW
Multiple RF channels 
4* to allow interference-free operation
Antenna built-in
* May vary per country according to local regulations
RF Control system information 
IR carrier freq. Range
32-57kHz (universal remote control extender)
RF carrier frequency 
433.92 MHz / AM mod.
RF transmission power 
<10 mW
Antenna external
Features 
Remote switching
yes
Automatic power on/off transmitter
yes
•  Wireless Link RC operatable
yes
•   Easylink compatible
yes
•   Auto format switching
yes (on transmitter)
•   Link A/V input sources 
yes
to CVR/DVD+RW
Transmitter unit
Dimensions (w x h x d) 
270 x 61 x 150 mm
Power standby/on switch 
on the front
View source on transmitter switch
on the front
Indication selected input 
7 segment LED display
on transmitter
Link input source to input 4 
on the front
(VCR / DVD+RW)
Indication link source 
LEDs
SCART Input 
3 SCART (RBG / CVBS + audio L/R)
SCART In/Output
In: as SCART input, Out:CVBS + audio L/R
SCART Output 
1 SCART (RBG / CVBS + audio L/R)
Audio out
RCA L/R
Receiver unit
Dimensions (w x h x d) 
61 x 146 x 150 mm
View source on receiver switches (+/-) on the front
Power standby/on switch 
on the front
SCART output 
1 SCART CVBS + audio L/R
Capture range of IR receiver 
up to 7 meters max.
Packaging contents
• 1 transmitter unit
• 1 receiver unit
• 1 Universal Remote Control
• 2 SCART cables
• 2 power supply adapters
• 1 RC extender cord (4 IR LEDs)
• 1 Instructions for use booklet