Meridian Data 1 ユーザーズマニュアル
20
E
XCEL
M
ERIDIAN
D
ATA
Connecting the Power
Plug the power cords and switch on both power supplies on. When the power is switched on, the LEDs on the
front of the Astra ES will light up.
front of the Astra ES will light up.
Power
Controller-2 Activ ity
FRU Status
Logical Driv e Status
Controller-1 Activ ity
Controller Heartbeat
Figure 6: Astra ES front panel LED display
When boot-up is finished and the Astra ES is functioning normally:
•
•
Controller LED blinks green once per second for five seconds, goes dark for ten seconds, then blinks green
once per second for five seconds again.
once per second for five seconds again.
•
Power, FRU and Logical Drive LEDs display green continuously.
•
Controller LEDs flash green if there is activity on that controller.
There are two LEDs on each disk drive carrier. They report the presence of power and a disk drive, and the
current condition of the drive.
current condition of the drive.
After a few moments the Power/Activity LED should display Green. If there is no disk drive in the carrier, the
Power/Activity LED will remain dark.
Power/Activity LED will remain dark.
The Power/Activity LED flashes during drive activity.
The Disk Status LED displays Green when a drive is present and configured.