Yorkville Sound YS1010 ユーザーズマニュアル
1
Introduction
Your new DJM806 Mixer/Amplifier is designed and
built to provide long-term trouble free performance.
Drawing on thirty-five years of experience in the
design and manufacturing of powered mixing con-
soles, Yorkville engineers were able to optimize the
design of the first high-powered DJ mixer. Features
include rack mountability, quiet internal fan cooling,
three microphone input-channels, three stereo input
channels with dual, switch-selectable pairs of inputs,
removable interchangeable main crossfader and head-
phone crossfader, two zones out, stereo balanced line
outputs, headphone monitoring of both the cue and
program buses, switchable stereo 7-band EQ, level
display assignable to Left/Right stereo operation or
cue/program operation, 255-preset digital signal pro-
cessing, 800 watts of stereo power built-in, a selection
of 1/4-inch and Speakon™ output connectors.
Terminology
• 3-pin microphone inputs are referred to as XLR connectors.
• ¼-inch jack sockets are called phone connectors.
• Balanced ¼-inch inputs or outputs are called TRS or Tip-Ring-Sleeve
• Master control and mixing channels are called buses.
• Overload indicators are called CLIP LED’s.
• Patch cables with dual conductors plus shielding and Tip-Ring-Sleeve (stereo) ¼-
• ¼-inch jack sockets are called phone connectors.
• Balanced ¼-inch inputs or outputs are called TRS or Tip-Ring-Sleeve
• Master control and mixing channels are called buses.
• Overload indicators are called CLIP LED’s.
• Patch cables with dual conductors plus shielding and Tip-Ring-Sleeve (stereo) ¼-
inch phone plugs are referred to as balanced patch cables.
Basic Features
• Channels 1-3 Balanced XLR & ¼-inch Combination Jack
• Balanced Mic inputs with low-noise input circuit design.
• Stereo Channels have Switchable Phono/Line stereo inputs
• Three-band EQ with +15dB/-15dB of range for Mic Channels.
• Three-band EQ with +15dB/-20dB of range for Stereo Channels.
• Post-EQ, post-fader, EFX (effects) send controls.
• Increased circuit headroom and gain for a more flexible mix.
• Gold internal bus-interconnects for long life and maximum signal integrity.
• Cue buttons and LEDs on all channels
• Pulse-stretching Clip LED’s indicate even the briefest peaks and fire at -3dB, well
• Balanced Mic inputs with low-noise input circuit design.
• Stereo Channels have Switchable Phono/Line stereo inputs
• Three-band EQ with +15dB/-15dB of range for Mic Channels.
• Three-band EQ with +15dB/-20dB of range for Stereo Channels.
• Post-EQ, post-fader, EFX (effects) send controls.
• Increased circuit headroom and gain for a more flexible mix.
• Gold internal bus-interconnects for long life and maximum signal integrity.
• Cue buttons and LEDs on all channels
• Pulse-stretching Clip LED’s indicate even the briefest peaks and fire at -3dB, well
before the onset of actual clipping, at all active channel stages.