Marantz PD4230V ユーザーズマニュアル
13
A AC IN
Connect the included power cord here.
B EXT SPEAKER L and R
Connect speakers (optional) here. Maintain the correct
polarity. Connect the
polarity. Connect the
(positive) speaker wire to the
EXT SPEAKER terminal and the
(negative)
speaker wire to the
EXT SPEAKER terminal on
both LEFT and RIGHT channels.
Please refer to your speaker’s User Guide.
Please refer to your speaker’s User Guide.
C VIDEO1, 2, 3 (BNC, RCA, S-Video)
Connect VCR’s, DVD’s or Video Cameras, etc. here.
D AUDIO1, AUDIO2, AUDIO3
These are audio input terminals.
The input is selectable. Set which video image to allot
them from the audio menu screen.
The input is selectable. Set which video image to allot
them from the audio menu screen.
E DVD1 / HD1
Connect DVD’s, High Definition or Laser Discs, etc.
here.
here.
F DVD2/ HD2, RGB2
DVD2/ HD2: You can connect DVDs, High Definition
sources, Laser Discs, etc. here.
This input can be set for use with an
RGB or component source.
(see page 25)
This input can be set for use with an
RGB or component source.
(see page 25)
RGB2:
You can connect an analog RGB signal
and the syncronization signal.
and the syncronization signal.
G RGB1 (D-Sub)
Connect an analog RGB signal from a computer, etc.
here.
here.
H DVD3/HD3, RGB3 (HDMI)
Connect a digital signal (TMDS) from a source with a
HDMI output.
This input can be set for use with an RGB3 or DVD3/
HD3 source. (see page 26)
HDMI output.
This input can be set for use with an RGB3 or DVD3/
HD3 source. (see page 26)
I
EXTERNAL CONTROL (D-Sub)
This terminal is used when operating and controlling
the monitor externally (by external control).
This terminal is used when operating and controlling
the monitor externally (by external control).
Rear View/ Terminal Board
A B
D
C
E
F
G
H
I
HDMI
02_Plasma_10_14
04.9.2, 11:46 AM
13