Lucent Technologies 5 ユーザーズマニュアル
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
System Manager’s Guide
555-650-118
Issue 1
June 1997
About Telecommunications
Page B-9
Signaling
B
■
Digital
■
Common-channel interoffice
The signals for alerting and supervisory functions are generated by the flow (or
absence of flow) of the direct current between the telephones and the switching
office.
absence of flow) of the direct current between the telephones and the switching
office.
Address information is communicated either by interruptions in the direct current
produced by rotary-dial telephones, or by the unique tones produced by
touch-tone telephones. Information signals (dial tone, busy signal, and so on) are
provided by the transmission of certain combinations of tones. For touch-tone
telephone service, dual-tone multifrequency (DTMF) signaling is used.
produced by rotary-dial telephones, or by the unique tones produced by
touch-tone telephones. Information signals (dial tone, busy signal, and so on) are
provided by the transmission of certain combinations of tones. For touch-tone
telephone service, dual-tone multifrequency (DTMF) signaling is used.
The supervision of trunks between COs also occurs by the flow (or absence of
flow) of direct current. However, because long-distance trunks carry only
alternating current (AC), a different kind of frequency is used. In 1976, AT&T
introduced a new interoffice signaling scheme called common channel interoffice
signaling (CCIS) in which a separate circuit between the offices is dedicated to
digital signaling transmissions between the computers that control the switches.
flow) of direct current. However, because long-distance trunks carry only
alternating current (AC), a different kind of frequency is used. In 1976, AT&T
introduced a new interoffice signaling scheme called common channel interoffice
signaling (CCIS) in which a separate circuit between the offices is dedicated to
digital signaling transmissions between the computers that control the switches.
The enhanced CCIS system in use today is called
common channeling signaling
(CCS) system and supports advanced features, such as calling-number
identification (Caller ID). The calling party’s number is transmitted from switching
office to office. This and other advanced services are available on the “intelligent”
network that has evolved because of the use of computers to control signaling.
identification (Caller ID). The calling party’s number is transmitted from switching
office to office. This and other advanced services are available on the “intelligent”
network that has evolved because of the use of computers to control signaling.
Telephone Numbering Plans
2
Unlike the verbal communication of the called party’s name in manually switched
systems, automated switching systems require that each telephone extension be
identified by a unique address that is convenient, readily understandable, and
similar in format to other extensions connected to the network.
systems, automated switching systems require that each telephone extension be
identified by a unique address that is convenient, readily understandable, and
similar in format to other extensions connected to the network.
In the early days of telecommunications, when a maximum of 10,000 lines could
be serviced by a telephone exchange, a 4-digit alphanumeric “address” was used
to specify the called party, for example, WA51 (Waverly 51).
be serviced by a telephone exchange, a 4-digit alphanumeric “address” was used
to specify the called party, for example, WA51 (Waverly 51).
Subsequently, 3-digit area codes were introduced to specify the area of the
country to be reached, and country codes were introduced for international
dialing. Finally, the individual telephone numbers expanded to the 7-digit numbers
in use today: a 3-digit central office code and a 4-digit extension number.
country to be reached, and country codes were introduced for international
dialing. Finally, the individual telephone numbers expanded to the 7-digit numbers
in use today: a 3-digit central office code and a 4-digit extension number.
NOTE:
In the past, the North American Numbering Plan has used area codes that
have only a 0 or 1 for the middle digit, for example, 908 or 215. Currently,
the numbering plan is being changed so that any number (0 through 9) can
be used for the middle digit. This system has already been designed to
take that change into account.
have only a 0 or 1 for the middle digit, for example, 908 or 215. Currently,
the numbering plan is being changed so that any number (0 through 9) can
be used for the middle digit. This system has already been designed to
take that change into account.